Full-time, part-time and distance advanced training for managers and specialists in construction, design, engineering surveys, occupational safety, fire safety, energy audits, environmental safety and restoration of cultural heritage sites. The minimum duration is 16 academic hours; for construction and design programs, it is generally 72 hours or more. Upon completion, an advanced training certificate of the prescribed form is issued.
Regulatory framework
Federal Law No. 273-FZ of 29 December 2012 “On Education in the Russian Federation”, Article 76
Order No. 266 of the Ministry of Science and Higher Education of Russia dated 24 March 2025 — procedure for additional professional programs effective from 1 September 2025
Urban Planning Code of the Russian Federation — provisions concerning self-regulatory organizations and specialists included in the National Register of Specialists
Federal Law No. 184-FZ of 27 December 2002 “On Technical Regulation”
Technical regulations, Codes of Practice (SP) and GOST standards applicable to the relevant field of activity
Professional standards and qualification requirements applicable to the participant’s position
Who requires training
Managers of construction, design and engineering-survey organizations
Specialists included or planned for inclusion in the NOSTROY/NOPRIZ National Register of Specialists
Engineering and technical personnel, foremen, work managers and chief project engineers
Construction-control specialists, technical customers and general-contractor representatives
Specialists in energy audits, environmental matters, restoration and preservation of cultural heritage sites
Employees confirming compliance with employer, self-regulatory organization or sector-specific requirements
1.1. Advanced training for construction specialists
For specialists involved in construction, reconstruction and major repair of capital construction facilities. Training covers technical-regulation requirements, organization of construction production, construction control, quality of work, as-built documentation and occupational safety.
Up-to-date knowledge is particularly important when working at technically complex, particularly hazardous and unique facilities, participating in procurement procedures and meeting customers’ contractual requirements.
Training objectives
Updating knowledge of urban-planning legislation and technical regulation
Improving the quality of construction, installation, finishing and specialized work
Reducing the risk of violations during construction control and acceptance of work
Preparation for activities within the self-regulation framework
Developing skills in maintaining as-built documentation and quality control
Programs
For specialists performing general construction work at capital construction facilities.
Requirements of the Urban Planning Code of the Russian Federation and technical regulations
Organization of construction production and construction control
As-built documentation and quality assurance
Occupational safety and industrial safety
Interaction with the customer and supervisory authorities
For specialists installing and maintaining engineering utilities.
Installation of internal engineering systems and external utility networks
Power-supply systems and communication systems
Regulatory documentation requirements and quality control
Acceptance procedure for engineering systems
For specialists of road- and bridge-construction organizations.
Road-construction requirements and bridge-construction technologies
Quality control of work and construction control
Specific requirements for work on transport infrastructure
Organization of construction control and quality control of construction products
Verification of compliance with design documentation
Preparation of as-built documentation
Interaction between construction participants and acceptance of completed work
Liability of participants in the construction process
Organization of construction production and scheduling
Construction project management and contractor coordination
Construction control and supervision
Functions of the technical customer and organization of construction
Interaction with contractors and design support
Construction control and commissioning of the facility
Organization of contracting activities and construction management
Subcontractor coordination and general-contractor liability
Self-regulatory organization requirements
Statutory requirements applicable to particularly hazardous facilities
Special safety requirements and industrial safety
Construction control and design specifics
Modern finishing technologies and quality requirements
Use of construction materials and quality control
Occupational safety during finishing work
Construction of buildings and structures · Construction activities at responsibility Levels 1 and 2 · Construction safety at technically complex and particularly hazardous facilities. Programs are developed for the specific position and customer requirements.
1.2. Advanced training for design specialists
For architects, design engineers, chief project engineers and managers of design organizations. Updating knowledge of urban-planning legislation, technical regulation, expert review, safety of buildings and structures, and accessibility.
Errors in design documentation lead to adverse expert-review findings, schedule disruption and financial losses for the customer. Advanced training is a tool for reducing design and legal risks, not a formality.
Special statutory requirements and technical regulation
Ensuring facility safety and expert review of design documentation
Construction support
Structural inspection methods and instrumental investigations
Assessment of technical condition and preparation of technical conclusions
Development of recommendations for structural strengthening
Functions of the general designer and coordination of design work
Quality control of design documentation
Interaction with related organizations
Accessibility requirements and barrier-free design
Regulatory requirements for social-infrastructure facilities
Ensuring the safety of buildings and structures during design work
Design activities for buildings at responsibility Levels 1 and 2
Architectural solutions and urban planning
Design of buildings and structures · Pre-design and design activities. Architecture and urban planning · Safety assurance during design and construction work.
1.3. Advanced training for engineering-survey specialists
For specialists performing engineering-geodetic, engineering-geological, engineering-geotechnical, engineering-hydrometeorological and engineering-environmental surveys. Engineering-survey materials directly affect building safety, the selection of structural solutions and construction costs.
Quality management of survey documentation, procedures for interaction with the customer and designer, and organization of work.
Field and office-work methods and requirements for topographic materials
Ground investigation and analysis of geological conditions
Preparation of technical reports
Analysis of hydrometeorological conditions and environmental assessment of the site
Investigation of the condition of foundation soils of buildings and structures
Engineering surveys for construction of buildings and structures · Organization of engineering surveys by a legal entity or individual entrepreneur engaged by the developer.
1.4. Advanced training in occupational safety
Programs for managers, specialists, occupational-safety commission members and authorized persons of construction-sector organizations. Implemented with due regard to Government Resolution No. 2464.
Occupational safety (basic program)
Occupational safety and safe work practices
Occupational safety for employees of construction-sector organizations
Occupational safety for specialists and managers
Occupational safety for managers responsible for occupational-safety matters
Occupational safety for members of occupational-safety committees and commissions and authorized persons
1.5. Advanced training in fire safety
For persons responsible for fire safety, specialists designing and maintaining fire-protection systems, and employees performing fire-hazardous work. Updated to reflect Order No. 1120 of the EMERCOM of Russia dated 16 December 2024, effective from 1 September 2025.
Fire-safety risk assessment
Design of fire alarm systems
Installation, maintenance and repair of fire-extinguishing and security/fire-alarm systems
Installation, maintenance and repair of opening infills in fire barriers
Installation, maintenance and repair of fire warning and evacuation systems
Preparation of fire-safety and technosphere-safety measure designs
Fire protection of building structures, materials and products
Installation, repair and maintenance of fire-safety systems for buildings and structures
Other programs on request
1.6. Advanced training in energy audits and energy efficiency
For specialists engaged in energy conservation, energy-efficiency improvement and energy surveys. Training covers modern methods of energy-consumption analysis, identification of losses and assessment of the economic effect of implementing energy-efficient solutions.
Energy surveys aimed at improving energy efficiency
Energy and resource conservation in construction
Fundamentals of energy conservation and energy-efficiency improvement
1.7. Advanced training in environmental safety
For managers and specialists of organizations whose activities affect the environment. Programs cover the duties of natural-resource users, industrial environmental control, waste management, protection of atmospheric air and water bodies, environmental reporting and interaction with supervisory authorities.
Environmental safety
Ensuring environmental safety by managers and specialists of general management systems
1.8. Advanced training in restoration
For specialists performing research, survey, design and production work for the preservation of cultural heritage sites. The activity requires compliance with cultural-heritage legislation, preservation of the site’s authenticity and the use of specialized restoration technologies.
Research, survey and design work in restoration
Restoration of decorative and artistic paintwork
Restoration and recreation of facade and interior paint finishes
Restoration and recreation of plaster finishes, architectural stucco decoration and artificial-marble cladding
Repair, restoration and recreation of roofs
Repair, restoration and recreation of metal structures and window and door hardware
Repair, restoration and recreation of wooden structures and components and wood carving. Biological, chemical and other protection of cultural heritage sites
Restoration of stone architecture monuments. Strengthening of structures, bases and foundations
Restoration of stone architecture monuments. Waterproofing, corrosion protection and other forms of protection of cultural heritage sites
Other programs on request
Result
Selection of a program for the position, type of activity and customer requirements
Training in full-time, part-time or distance format
Final assessment in accordance with the procedure established by the educational program
Advanced training certificate of the prescribed form
Development of individual programs at the organization’s request
Describe your task — we will assess the initial conditions and propose the optimal route.